BCG Concepts

  Home > Shop Online > Audio >

  Epos AVS 5.1 Surround System



 
Alternative Views:


Our Price: $1,795.00



Availability:: Usually Ships 1 to 2 Business Days
Product Code: AVS5.1
Qty:

Description
 
The AVS 5.1 system is the latest Epos Home Theatre package, designed to meet the exacting demands of the discerning listener. This elegant piano gloss black speaker package provides sound quality to match its stunning looks. Constructed in solid MDF cabinets, these sculptured cabinets are painted and polished to a high-gloss finish which is popular in many homes today.

Satellites

The satellite speakers are based on two new drivers from Epos. A metal dome tweeter, similar to the one used in the new ELS8 and a long throw 4” paper-pulp cone mid-bass driver mounted in a pressed steel chassis. These drivers are magnetically shielded. With two forward firing ports they are well suited to being mounted close to a rear wall if required.

A multiple order crossover uses high-grade close-tolerance components to maintain high sound quality expected from an Epos speaker. They are voiced for Home Theatre, but are equally suited to music reproduction.

A matching elegant AVS metal stand is also available which positions the satellites above furniture to give the best results.

Centre Channel

The centre channel speaker is based on the same drive units used in the satellites. Using two mid-bass drives and one tweeter and forward firing tuning ports, they are a perfect match for any system and are a small enough to fit in most TV equipment stands.

Sub woofer

An attractive powered Sub woofer is supplied in the package. It uses a specially developed 8” paper cone long-throw woofer, with 2” voice coil. It’s powered by a custom made 100 Watt analogue amplifier with adjustments for volume, frequency and phase. The woofer is forward firing with a removable cloth grille and large down-firing port. Therefore, it must be mounted on 2” (50mm) high feet, to allow the port to breath. It is supplied with a simple remote control for adjusting the volume and powering on and off. It is cosmetically matched to the centre channel and satellite in high gloss black.

Technical Specification

Satellites

Design 2 way bass reflex
Power 100 Watts
Impedance 4 Ohm nominal
Sensitivity 86dB / 2.83V@1m
Frequency Response 70Hz – 19kHz +/- 3dB
Woffer 115 mm cone woven Kevlar
Tweeter 25mm aluminium/magnesium alloy dome with neodymium magnet
Crossover Second order on woofer and tweeter at 2.5 kHz, with film capacitors in the tweeter section
Cabinet 12mm MDF with internal bracing Finish High gloss black paint
Weight 2.7kg (5.9lb)
Size 235 x 130 x 187 mm (9.25 x 5.12 x 7.36 ins) H x W x D

Center Channel

Design 2 1/2 way bass reflex
Power 100 Watts
Impedance 4 Ohm nominal
Sensitivity 84dB / 2.83V@1m
Frequency Response 65Hz – 19kHz +/- 3dB
Woffer 2x 115 mm cone woven Kevlar
Tweeter 25mm aluminium/magnesium alloy dome with neodymium magnet
Crossover Second order on woofer and tweeter at 2.5 kHz, with film capacitors in the tweeter section
Cabinet 12mm MDF with internal bracing Finish High gloss black paint
Weight 4.8kg (10.5lb)
Size 130 x 385 x 167 mm (5.12 x 15.2 x 6.57 ins) H x W x D

Subwoofer

Design Bass reflex with forward firing driver and down firing port
Power 100 Watts
Impedance 4 Ohm nominal
Sensitivity 84dB / 2.83V@1m
Bass Response 38Hz (-6dB)
Woffer 200mm (8”) with stiff paper pulp cone
Front Display No light, power off. Green power on. Red standby.
Auto On/Off The unit will go into standby after approximately 15 minutes with no input signal
Inputs and outputs
Low level LFE
Line level
High Level
Unfiltered
Stereo IN and OUT
Loudspeaker level IN and OUT
Controls Volume (also controllable by the remote control)

Variable low-pass filter 40-160Hz

Continuously variable phase control 0-180 degrees

Remote Control with functions, STANDBY/ON, Volume UP and DOWN

Finish High Gloss Black Paint
Weight 16.1 kg (35.4 lb) Packed in carton with outer sleeve
Voltages 110-120V AC 60Hz or 220-240V 50Hz (factory preset via AC VOLTAGE SELECTOR switch) Please check this is set correctly for your local mains supply
Size 380 x 300 x 360 mm (15 x 11.8 x 14.2 ins) H x W x D
Measurement includes 50mm spikes
Weight 12.6 kg (27.7 lb)

Share your knowledge of this product. Be the first to write a review »